技术资料或价格如有变动,恕不另行通知。价格可能因国家而异,不包括税收、关税或交货。
所有商标均为其各自所有者的财产。我们的一般条款和条件适用于:www.nbrc.tw/terms
当配备有微量滴定板(高或低格式)或高达108标准1.5mL样品瓶时,自动进样器可以从多达768个位置注入。由于高效的内部和外部针刷手术,样品携带显着最小化。该自动进样器也快速灵活:一个完整的样品喷射循环需要不到一分钟,包括针状洗涤。支持三种不同的喷射模式;“full loop filling” (highest precision and reproducibility), “partial loop filling” (variable volumes, e.g. for dilution series) and “µl pickup” (loss-free injection of extremely small sample volumes), allowing the user to optimize sample usage. The headspace pressure function prevents bubbles from forming in the vial during sample uptake. Precolumn derivatization is supported. For high-pressure injections of up to 1240 bar, the autosampler is equipped with a so-called ILD™ valve (Intermediate Loop Decompression). This valve consists of a rotor-stator combination and includes a central port for depressurizing. For highpressure applications, the sample loop is depressurized prior to receiving the sample. This way, the sample is not diluted with solvent. Because the valve is switched extremely fast, pressure spikes are reduced. Analyses are more precise and wear of the column is reduced.
精密进样与自动进样器AZURA AS 6.1L
自动进样器AZURA AS 6.1L前视图
一个含有AZURA AS 6.1L的高效液相色谱系统的例子
自动进样器流路径 | 分析 |
---|---|
最大背压 | 1240酒吧 |
瓶/板尺寸 | 孔板尺寸符合ANSI SLAS 4-2004(原ANSI/SBS 4-2004) max。板/瓶高度:47毫米(包括隔片或盖板) |
注入量范围 | 0.1µl - 10ml随样品循环而异 |
样品环 | 10µl |
自动售货机注射器 | 250µl |
顶部空间压力 | 内置压缩机,仅适用于带隔膜的样品瓶 |
inj开关时间。阀 | <100毫安 |
针穿刺精度 | ±0.6毫米 |
样品盘冷却 | 4 - 40°c |
瓶检测 | 通过传感器缺少小瓶/孔板检测 |
针洗 | 可编程:注射和小瓶之间的清洗 |
湿材料 | Tefzel®(ETFE),玻璃,Teflon®(PTFE), Kel-F®(PCTFE),不锈钢,PEEK, Vespel |
注入模式 | 全回路灌装、部分回路灌装、微升灌装;PASA™(压力辅助样品抽吸) |
---|---|
注射精度 | RSD(相对标准偏差):全环填充:<0.3%部分环填充:注射用>5µl: <0.5%微升,注射用>5µl: <1.0% |
样品核糖 | < 0.01%典型条件下使用针洗;< 0.0003%的特殊条件下延长针洗(s.技术说明VTN0004) |
注射/瓶 | max。9注射 |
注射周期时间 | 最小7秒,来自不同小瓶的相同小瓶; <60 s用于>100μl样品喷射,包括注射模式,包括在内。300μl针洗涤 |
分析时间 | max。9小时,59分钟,59秒 |
输入 | 2个可编程TTL输入(下一个注入,冻结,停止) |
---|---|
输出 | 1个可编程继电器输出(注射标记,辅助,报警) |
控制 | 以太网(LAN) |
界面 | LAN,模拟 |
环境条件 | 温度范围:10-40℃;50-104°F空气湿度:20 - 80% |
---|
电力供应 | 95-240 V AC. |
---|---|
维 | 361 x 375 x 635 mm(w x h x d) |
重量 | 32公斤 |
技术资料或价格如有变动,恕不另行通知。价格可能因国家而异,不包括税收、关税或交货。
所有商标均为其各自所有者的财产。我们的一般条款和条件适用于:www.nbrc.tw/terms